Werbung
Verfügbare Sprachen
Verfügbare Sprachen
I N ST R U C T I O N M A N U A L
1. INSTALLATION & USE
Use of the light strip
• The rechargeable light strip is powered by the integrated power cord with USB-C plug (3).
Plug the USB-C male plug to a suitable power source, such as a 5V2A power adapter or powerbank.
• The light strip is turned on by pressing the touch power button (5) once.
• The light strip is dimmable from 10 – 100%. To adjust the strength, press and hold the touch power button.
• To use the light strip in a tent or on the campsite to light strip hanging points using the adjustable carabiners, and
connect the USB-C plug to a suitable power source.
• To use the light strip as a lantern, put the light strip into the ripstop polyester light strip pouch (1) and hang it in
lantern hanging point using the included carabiner.
• The light strip pouch can also be used with a headlamp inside, if you prefer using the light strip in its full length.
• Do not stare into the light source.
• Do not modify the product.
2. CLEANING & MAINTENANCE
Light strip can be cleaned with water and a damp rag.
Do not use corrosive liquids to clean the lamp as this might damage the light strip.
3. LIGHT SOURCE
Light source and control gear is not replaceable. This would introduce weak points in the construction,
that could reduce the lifetime of the product.
4. DISASSEMBLY & DISPOSAL
Dispose of plastic components, such as plastic carabiners according to local regulations.
Dispose of electronics, such as power button, light source & electric wires according to local regulations.
Dispose of remaining components according to local regulations.
2
5. TECHNICAL DATA
5V
, 9.5W
Input: 5V
, 1.9A
Degree of protection: The product is water resistant to IPX4
Class 3 appliance
Robens Customer Service
Email: info@robens.de
3
Werbung
