J5create JUC100 Bedienungsanleitung Seite 4

WORMHOLE SWITCH
3. The device will automatically start Wormhole Switch software
installation on both computers
4. Window might open "AutoPlay" options. Please Click on The
option "Run WKMLoader.exe"
5. If the "User Account Control"
window appears on the screen,
Click "Yes" to continue.
6. When you see the pop-up message appear at the bottom right
of the screen then you are ready to operate the Wormhole
Switch application.
Troubleshooting:
If auto-run is not launched, please follow the step below to start the j5 Wormhole
Switch application:
1. Check each connector on the USB cable that it is correctly
inserted on your two computers.
2. Go to My Computer and double-click the j5 Wormhole
Switch icon to start the application ( ).
4
USER MANUAL