Herunterladen Inhalt Inhalt Diese Seite drucken

Preparing For Use - Zenoah HBZ2600 Betriebsanleitung

Vacuum kit
Vorschau ausblenden Andere Handbücher für HBZ2600:
Inhaltsverzeichnis

Werbung

10
English

PREPARING FOR USE

Attach the adequate accessories,
respectively for blower operation and dust-
collecting operation.
Note:
Use the gloves during operation.
Note:
In adjustment of the blower/dust collector
or in other types of operation, be sure to
stop the engine and detach the spark plug
cap.
Note:
Never start operation unless this machine
is completely assembled.
■ Mounting the dust-collecting kit
1)
1. Fit the extension pipe (1) groove with
main unit port projection, turn to
mount the pipe to the main unit.
2. Tighten the clamp screw (2) securely.
2) Installing Vacuum pipe (nozzle)
1. Loosen the screw (3), and open the
suction port cover.
2. Align the
(5) indicated on the
vacuum pipe (4) with the
indicated on the blower. Then insert
the vacuum pipe (4) into the blower.
3. Turn the vacuum pipe (4) until the
(5) is aligned with the
indicated on the blower to lock the
vacuum pipe.
CAUTION:
Hold the bottom of the vacuum pipe
when turning the vacuum pipe to install
or remove it.
Français
Préparatifs à l'utilisation
Fixer les accessoires adéquats pour le
souffleur ainsi que pour l'aspirateur.
Remarque:
Utiliser des gants pour le fonctionnement.
Remarque:
Pour régler le souffleur/aspirateur ou pour
tout autre type de fonctionnement,
s'assurer d'arrêter le moteur et de retirer
le capuchon de la bougie d'allumage.
Remarque:
Ne jamais utiliser l'appareil avant de
l'assembler entièrement.
■ Montage du kit d'aspiration
1)
1. Placer la rallonge de tuyau(1) en
alignant l'encoche sur l'ergot de
l'appareil et tournez-la pour la
verrouiller.
2. Serrez le collier(2) fermement.
2) Installation de tube d'aspiration
(éjecteur)
1. Desserrer les vis (3) et ouvrir le
couvercle du port d'aspiration.
2. Aligner le
(5) indiqué sur le tube
d'aspiration (4) avec le
sur le souffleur.
3. Tourner le tube d'aspiration (4)
jusqu'à ce que
(5) soit aligné
avec
indiqué sur le souffleur pour
verrouiller le tube d'aspiration.
Précaution:
Tenir le bas du tube d'aspiration pour
le tourner afin de l'installer ou de le
retirer.
indiqué

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hb2311ezRedmax hbz2600Hbz2601

Inhaltsverzeichnis