Superdrive RACING WHEEL GS 500 Benutzerhandbuch Seite 6

Programming procedure
• Press the PROG key for 3 seconds, the green LED lights up.
• Then press any of the 8 programmable keys (listed above) to set up a new function. The
green LED flashes.
• Finally press the button that you would like to reassign to the programmable key (o,
A LI, RI, L2, R2). The green LED turns off, the key is now programmed.
• Repeat the above steps to program other buttons if necessary.
Reset one programmed key
• Press the PROG key for 3 seconds, the green LED lights up.
• Then press on the programmed key that you would like to reset. TThe green LED flashes.
• Press the button that you would like to reset again. The green LED turns off, the key is now
reset to default.
Reset all the programmed keys
• Press the PROG key for 3 seconds, the green LED lights up.
• Press OPTIONS/Menu
reset to default.
You can also unplug the wheel for resetting the configuration.
6. Sensitivity adjustment
The sensitivity control is designed for a better steering control adapted to the different types
of racing game environments,
ity, follow those steps:
• Press the SHARE/ View and OPTIONS/Menu
LED lights up.
• Press the SHARE/ View to display the current sensitivity
• Press the SHARE/ View again to adjust the direction
following way:
o Medium, green LED flashes: steering angle is small, good for quick turns racing games
o High, green LED flashes fast: steering angle is very small, good for very quick turns,
corner turning, etc.
o Low, green LED flashes slowly: steering
games
• Press UP of the D-Pad to confirm
7. Troubleshooting
If the steering wheel doesn't work after the connection, unplug it, turn the console off and
follow the set up steps cautiously
On PS4 and XBOX ONE, make sure that the controller that you plug into the wheel is
powered off. After checking that, follow the steps again.
8. Precautions of uses
• Do not use this product
• The wheel should not be used in humid places, splashed or be placed near objects filled
with liquids, such as vases. After use, keep the wheel in a dry place.
• Never attempt to disassemble
• Do not apply any excessive pressure to the device and do not apply it to violent shock.
• Stop using this unit immediately if you begin to feel tired or if you experience discomfort or
button for 4 seconds. The green LED turns off, all keys are now
such as Off-Road,
that the sensitivity
in the right order.
for other purposes than the ones described
or reconstruct
Grand Prix racing, etc. To adjust the sensitiv-
keys simultaneously for 3 seconds, the green
status.
sensitivity
angle is normal, adapted to most of the racing
function
it by yourself.
selection, and cycle in the
adjustment is complete.
in this document.
, o,
5