Superdrive RACING WHEEL GS 500 Benutzerhandbuch Seite 5

Set up the wheel on PC
1. Turn on the PC.
2. Plug the cable of the pedals into the steering wheel.
3. Connect the USB cable of the wheel to any of the USB ports of the PC. A Windows
starts automatically
on, the wheel is now ready to use.
IMPORTANT: The steering wheel uses the X-Input protocol by default, so it is compatible
with the latest games. Some older games use the Direct Input protocol. To switch to Direct
Input mode, press and hold the Home/Mode
indicate the change. This mode will then be used by default.
You can switch from one mode to another at any time by holding down the Home/Mode
button for 3 seconds.
To set up the wheel in Direct Input mode, install the driver provided
connecting the wheel to the PC.
Set up the wheel on PS3
1. Make sure that the PS3 is turned
2. Plug the wheel cable into a USB port from the console.
3. Plug the cable of the pedals into the steering wheel.
4. Turn on the console.
5. Press the HOME
6. The red LED of the wheel stays lit, the steering wheel is now ready to use.
5. Programming function
You can now play GRAN TURISMO or any other racing games that use the default button
configuration. For other games, you have 2 options to make the right button configuration:
• You can either go to the Options/Controllers
configuration. The advantage is that you can save it for later gaming sessions.
IMPORTANT: The RACING WHEEL GS 500 is identified as a "game controller" in the
commands menu of the games. If you wish to modify the button configuration
go to the "game controller"
• You can also use the programming function 'on-the-go" of the RACING WHEEL GS 500. It
enables you to create the configuration you want without going in the Options menu of the
game, but that configuration will not be saved.
This wheel has a built-in
make your own driving comfort and experience.
8 keys can be programmed:
• Left paddle
Right paddle
• Left pedal
Right pedal
• Gearshift +
• Gearshift
4
to install the device. At the end of that operation,
off.
button of the wheel
section, not to the "steering wheel"
program function:
button for 3 seconds, the LED will flash once to
to activate the connection.
menu in the game and create your own
you can assign a new function
the red LED remains
on the CD-Rom
in the game,
section.
to some buttons
utility
before
to