Milwaukee pH51 Bedienungsanleitung

SPECIFICATIONS
Range 0.0 to 14.0 pH
Resolution 0.1 pH
Accuracy (@25 °C) ±0.1 pH
Calibration Manual, at 2 points
through trimmers
pH electrode MA73600
Environment 0 to 50 °C; 100% RH
Battery type 3 x 1.5V, alkaline
Battery life more than 1500 hours
of continuous use
Dimensions 165 x 30 x 30 mm
Weight 80 g
ACCESSORIES
MA73600 Replaceable pH electrode
pH 4.01 buffer, 20 ml sachet,
M10004B
25 pcs.
pH 7.01 buffer, 20 ml sachet
M10007B
25 pcs.
pH 10.01 buffer, 20 ml sachet
M10010B
25 pcs.
Electrode storage solution,
MA9015
230 ml
Electrode cleaning solution,
MA9016
230 ml
Electrode rinse solution, 20 ml
M10000B
sachet, 25 pcs.
CERTIFICATION
Milwaukee Instruments conform to the CE European
Directives.
Disposal of Electrical & Electronic Equipment. Do not
treat this product as household waste. Hand it over to the
appropriate collection point for the recycling of electrical
and electronic equipment.
Disposal of waste batteries. This product contains
batteries. Do not dispose of them with other household
waste. Hand them over to the appropriate collection point
for recycling.
Please note: proper product and battery disposal
prevents potential negative consequences for human
health and the environment. For detailed information,
contact your local household waste disposal service or
go to www.milwaukeeinstruments.com (USA & CAN)
or www.milwaukeeinst.com.
RECOMMENDATION
Before using this product, make sure it is entirely suitable for
your specific application and for the environment in which it is
used. Any modification introduced by the user to the supplied
,
equipment may compromise the meter's performance. For
your and the meter's safety do not use or store the meter
in hazardous environment. To avoid damage or burn, do not
,
perform any measurement in microwave ovens.
WARRANTY
This instrument is warranted against defects in materials
and manufacturing for a period of 2 years from the date of
purchase. Electrode is warranted for 6 months. This
warranty is limited to repair or free of charge
replacement if the instrument cannot be repaired.
Damage due to accidents, misuse, tampering or lack of
prescribed maintenance is not covered by warranty. If
service is required, contact your local Milwaukee
Instruments Technical Service. If the repair is not covered
by the warranty, you will be notified of the charges
incurred. When shipping any meter, make sure it is
properly packaged for complete protection.
Milwaukee Instruments reserves the right to make
improvements in design, construction and appearance of
its products without advance notice.
ISTPH51 09/20
USER MANUAL
PRO Waterproof
milwaukeeinstruments.com (USA & CAN)
SATISFACTION
GUARANTEED
pH51
pH Tester
milwaukeeinst.com