Seite 2
Please read this manual carefully before using the product and keep it in a safe place. Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools. Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human injury or device damage.
Package Content Packing list Please check that the package of the monitor contains all parts. If any part is lost, please contact the distributor. The color and shape of parts may vary with models. Figures in this User Manual are for reference only. Wires supplied may vary with purchased products.
Seite 4
Installation Installation of base 1. Open the package, take out the product 2. Take out the main parts of the accessory bag with foam still attached, and gently place and put the machine in the lower foam box. it on a desktop or table. 3.
Seite 5
Installation Installation of mount 1. Open the package, take out the product with foam still attached, and gently place it on a desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor was already attached to the stand, remove the stand.
Seite 6
Adjustment of monitor Rotation angle -15.0°(±2.0°) ~ +15°(±2.0°) +15° -5.0° 95mm Tilting angle Height adjustment range -5.0° ~ +15° 95±5mm English...
Instructions for use Description of buttons Button Function Menu button: Press to enter sub-menus/ quickly enter the main menu. Down button: Press to move down in the menu/quickly adjust the brightness Up button: Press to move up in the menu/quickly switch input signals of the port Exit: Press to return to the previous menu Power button: Press to turn on/off...
Instructions for use Cable connection: * The bottom interface configuration at the back of the monitor varies with products. * Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.
OSD Menu Menu description * The color and shape of the OSD menu of the actual monitor may be slightly different from them shown in the figure. * Specifications of the OSD menu may change with improvements of functions without prior notice. * The on-screen display (OSD) menu can be used to adjust the settings of the monitor and is displayed on the screen after turning on the monitor and pressing the M button.
Seite 10
Parameters Product Name LCD Monitor Product model C49SHC Screen Size 49” (124cm) Aspect Ratio 32:9 Viewing Angle 178°(H) / 178°(V) Pixel pitch 0.1038 (H) x 0.3114(V) mm Contrast ratio 3000:1(Typ) Colors 16.7M Resolution 3840x1080 Maximum refresh rate 144Hz 100-240V~, 50/60Hz 3.0A The standard voltage and current may vary with countries, please refer to the Power specifications...
Seite 12
BENUTZERHANDBUCH FÜR MONITOR C49SHC Deutsch...
Seite 13
Bitte lesen Sie dieses Handbuch vor der Verwendung des Produkts sorgfältig durch und bewahren Sie es an einem sicheren Ort auf. • Halten Sie den Monitor von Wasserquellen oder feuchten Orten wie Badezimmern, Küchen, Kellern und Swimmingpools fern. • Stellen Sie sicher, dass der Monitor auf einer ebenen Fläche steht. Wenn der Monitor herunterfällt, kann dies zu Verletzungen oder Schäden am Gerät führen.
Inhalt der Verpackung Verpackungsliste • Vergewissern Sie sich, dass die Verpackung des Monitors alle Teile enthält.Sollte ein Teil verloren gehen, wenden Sie sich bitte an den Händler. • Die Farbe und Form der Teile kann je nach Modell variieren. Die Abbildungen in diesem Benutzerhandbuch dienen nur als Referenz.
Installation Installation vom Sockel 1. Öffnen Sie die Verpackung, nehmen Sie das 2. Nehmen Sie die wichtigsten Teile der Produkt mit dem noch anhaftenden Schaumstoff Zubehörtasche heraus und legen Sie das Gerät in die heraus und legen Sie es vorsichtig auf eine untere Schaumstoffbox.
Installation Montage der Halterung 1. Öffnen Sie die Verpackung, nehmen Sie das Produkt mit dem noch anhaftenden Schaumstoff heraus und legen Sie es vorsichtig auf eine Arbeitsfläche oder einen Tisch. Entfernen Sie die zusätzlichen Teile und den Schaumstoff, der den Monitor bedeckt. Wenn der Monitor bereits am Ständer befestigt war, entfernen Sie den Ständer.
Gebrauchsanweisung Beschreibung der Tasten Taste Funktion Menü-Taste: Drücken Sie diese Taste, um Untermenüs aufzurufen bzw. schnell in das Hauptmenü zu gelangen. Abwärts-Taste: Drücken, um im Menü nach unten zu gehen/schnell die Helligkeit einzustellen Aufwärts-Taste: Drücken Sie diese Taste, um im Menü nach oben zu gehen/schnell das Eingangssignal des Anschlusses zu wechseln.
Gebrauchsanweisung Kabelanschluss: * Die Konfiguration der unteren Schnittstelle auf der Rückseite des Monitors variiert je nach Produkt. * Hinweis: Wenn das Strom- oder Signalkabel beschädigt ist, müssen Sie es durch spezielle weiche Kabel oder spezielle Komponenten ersetzen, die Sie beim Hersteller oder in der Wartungsabteilung erwerben. HDMI-Schnittstelle RJ45-Schnittstelle Verwenden Sie das HDMI-...
OSD-Menü Menübeschreibung * Die Farbe und die Form des OSD-Menüs des tatsächlichen Monitors können sich geringfügig von den in der Abbildung gezeigten unterscheiden. * Die Spezifikationen des OSD-Menüs können sich im Zuge von Funktionsverbesserungen ohne vorherige Ankündigung ändern. * Das Bildschirmmenü (OSD) kann zum Anpassen der Einstellungen des Monitors verwendet werden und wird nach dem Einschalten des Monitors und Drücken der Taste M auf dem Bildschirm angezeigt.
Seite 21
Parameter PRODUKTNAME LCD-Monitor Produktmodell C49SHC Bildschirmgröße 49 Zoll (124 cm) Bildseitenverhältnis 32:9 Blickwinkel 178° (H)/178° (V) Pixelabstand 0.1038 (H) x 0.3114 (V) mm Kontrastverhältnis 3000:1 (Typ) Farben 16.7 Mio. Auflösung 3840x1080 Maximale Aktualisierungsrate 144 Hz 100 - 240 V~, 50/60 Hz, 3.0 A Leistungsspezifikationen Die Standardspannung und -stromstärke kann je nach Land variieren, bitte beachten...
Seite 23
MANUEL D'UTILISATION DU MONITEUR C49SHC Français...
Seite 24
Veuillez lire attentivement ce manuel avant d'utiliser le produit et conservez-le dans un endroit sûr. • Gardez le moniteur éloigné des sources d'eau ou des endroits humides, tels que les salles de bain, les cuisines, les sous-sols et les piscines. •...
Contenu d'emballage Liste de colisage • Veuillez vérifier si l'emballage du moniteur contient toutes les pièces. En cas de perte d'une pièce, veuillez contacter le distributeur. • La couleur et la forme des pièces peuvent varier selon les modèles. Les figures de ce manuel d'utilisation sont uniquement à...
Seite 26
Montage Montage de la base 1. Ouvrez l'emballage, sortez le produit avec la 2. Retirez les parties principales du sac d'accessoires et mousse toujours attachée et placez-le délicatement placez la machine dans la boîte en mousse sur un bureau ou une table. inférieure.
Montage Installation du support 1. Ouvrez l'emballage, sortez le produit avec la mousse toujours attachée et placez-le délicatement sur un bureau ou une table. Retirez les pièces supplémentaires et la mousse recouvrant le moniteur. Si le moniteur était déjà fixé au support, retirez le support. 2.
Seite 28
Ajustement du moniteur Angle de rotation -15,0°(±2,0°) - +15°(±2,0°) Angle d'inclinaison Plage de réglage de la hauteur 95±5mm -5,0° - +15° Français...
Instructions d’utilisation Description des boutons Bouton Fonction Bouton Menu : appuyez pour accéder aux sous-menus/accéder rapidement au menu principal. Bouton bas : appuyez pour descendre dans le menu/régler rapidement la luminosité Bouton haut : appuyez pour monter dans le menu/changer rapidement les signaux d'entrée du port Quitter : appuyez pour revenir au menu précédent Bouton d'alimentation : appuyez pour allumer/éteindre le moniteur.
Instructions d’utilisation Câble de connexion : * La configuration de l'interface inférieure à l'arrière du moniteur varie selon les produits. * Remarque : si le câble d'alimentation ou le câble de signal est endommagé, vous devez le remplacer par des câbles souples spéciaux ou des composants spéciaux achetés auprès du fabricant ou du service de maintenance.
Menu OSD Description des menus * La couleur et la forme du menu OSD du moniteur réel peuvent être légèrement différentes de celles illustrées sur la figure. * Les spécifications du menu OSD peuvent changer avec des améliorations des fonctions sans préavis. * Le menu d'affichage à...
Seite 32
Paramètres Désignation du produit Écran LCD Modèle du produit C49SHC Taille de l’Écran 49" (124 cm) Ratio d'aspect 32:9 Angle de vue 178° (H)/178° (V) Pas de pixels 0.1038 (H) x 0.3114 (V) mm Rapport de contraste 3000:1 (Typ) Couleurs 16.7 M...
Seite 34
MANUAL DE USUARIO PARA MONITOR C49SHC Español...
Seite 35
Lea detenidamente este manual antes de utilizar el producto y guárdelo en un lugar seguro. • Mantenga el monitor alejado de fuentes de agua o lugares húmedos, incluidos, entre otros, baños, cocinas, sótanos y piscinas. • Asegúrese de que el monitor se encuentre en una superficie plana. La eventual caída del monitor puede provocar lesiones humanas o daños al dispositivo.
Contenido del Paquete Lista de empaque • Verifique que el paquete del monitor contenga todas las piezas. En caso de falta de alguna pieza, comuníquese con el distribuidor. • El color y la forma de las piezas pueden variar por modelo. Las figuras en este Manual de Usuario son solo de referencia.
Instalación Instalación de la base 1. Abra el paquete, saque el monitor con espuma aún 2. Saque las partes principales de la bolsa de adherida y colóquelo con cuidado en un escritorio o accesorios y coloque el monitor en la caja de una mesa.
Seite 38
Instalación Instalación de la montura 1. Abra el paquete, saque el monitor con espuma aún adherida y colóquelo con cuidado en un escritorio o una mesa. Retire las piezas sobrantes y la espuma que cubre el monitor. Si el monitor ya está conectado al soporte, quítelo.
Instrucciones de uso Descripción de los botones Botón Función Botón Menú: Presiónelo para ingresar a los submenús/ingresar rápidamente al menú principal. Botón Abajo: Presiónelo para mover hacia abajo en el menú/ajustar rápidamente el brillo Botón Arriba: Presiónelo para mover hacia arriba en el menú/cambiar rápidamente las señales de entrada del puerto Salir: Presiónelo para regresar al menú...
Instrucciones de uso Conexión del cable: * La configuración de la interfaz inferior en la parte posterior del monitor varía por monitor. * Nota: El cable de alimentación o de señal que está dañado debe reemplazarse con un cable blando especial o con componentes especiales comprados en el departamento de fabricación o mantenimiento.
Menú OSD (visualización en pantalla) Descripción del menú * El color y la forma del menú OSD del monitor real pueden ser un poco diferentes de los que se muestran en la figura. * Las especificaciones del menú OSD están sujetas a cambios por mejoras de funciones sin previo aviso. * El menú...
Seite 43
Parámetros Nombre del Producto Monitor LCD Modelo del producto C49SHC Tamaño de la Pantalla 49” (124 cm) Relación de Aspecto 32:9 Ángulo de Visión 178° (H)/178° (V) Tamaño de píxel 0.1038 (H) x 0.3114 (V) mm Relación de contraste 3000:1 (Tipo) Colores 16.7 M...
Seite 45
MANUALE DELL'UTENTE PER IL MONITOR C49SHC Italiano...
Seite 46
Si prega di leggere attentamente questo manuale prima di utilizzare il prodotto e di conservarlo in un luogo sicuro. • Tenere il monitor lontano dalle fonti d'acqua o luoghi umidi, come bagni, cucine, cantine e piscine. • Assicurarsi che il monitor sia posizionato su una superficie piana. Se il monitor cade, potrebbe causare lesioni umane o danni al dispositivo.
Contenuto del pacchetto Elenco di imballaggio • Si prega di verificare che il pacchetto del monitor contenga tutte le parti. Se manca qualche parte, contattare il distributore. • Il colore e la forma delle parti possono variare a seconda dei modelli. Le figure in questo Manuale dell'Utente sono solo a scopo illustrativo.
Installazione Installazione della base 1. Aprire il pacchetto, estrarre il prodotto con la 2. Prendere le parti principali del sacchetto degli schiuma ancora attaccata e posizionarlo accessori e mettere la macchina nella scatola di delicatamente su una scrivania o un tavolo. schiuma inferiore.
Installazione Installazione del supporto 1. Aprire il pacchetto, estrarre il prodotto con la schiuma ancora attaccata e posizionarlo delicatamente su una scrivania o un tavolo. Rimuovere le parti extra e la schiuma che copre il monitor. Se il monitor era già attaccato allo stand, rimuovere lo stand.
Istruzioni per l'uso Descrizione dei pulsanti Pulsante Funzione Pulsante Menu: Premere per accedere ai sottomenu/entrare rapidamente nel menu principale. Pulsante Giù: premere per muoversi verso il basso nel menu/regolare rapidamente la luminosità Pulsante Su: premere per muoversi verso l'alto nel menu/cambiare rapidamente i segnali di ingresso della porta Uscita: premere per tornare al menu precedente Tasto di accensione: Premere per accendere/spegnere il monitor.
Istruzioni per l'uso Connessione del cavo: * La configurazione dell'interfaccia inferiore sul retro del monitor varia a seconda dei prodotti. * Nota: Se il cavo di alimentazione o il cavo del segnale sono danneggiati, è necessario sostituirli con cavi speciali morbidi o componenti speciali acquistati presso il produttore o il dipartimento di manutenzione. Interfaccia HDMI Interfaccia RJ45 Utilizzare il cavo HDMI per...
Seite 53
Menu OSD Descrizione del menu * Il colore e la forma del menu OSD del monitor effettivo possono essere leggermente diversi da quelli mostrati nella figura. * Le specifiche del menu OSD possono cambiare con il miglioramento delle funzioni senza preavviso. * Il menu a schermo (OSD) può...
Seite 54
Parametri Nome del prodotto Monitor LCD Modello del prodotto C49SHC Dimensioni dello schermo LCD 49” (124cm) Aspect Ratio 32:9 Angolo di visione ampio 178°(H) / 178°(V) Pixel pitch 0.1038 (H) x 0.3114 (V) mm Rapporto di contrasto 3000:1 (Tipico) Colori 16.7M...
Seite 56
INSTRUKCJA OBSŁUGI MONITORA C49SHC Polski...
Seite 57
Przed użyciem produktu należy uważnie przeczytać tę instrukcję i przechowywać ją w bezpiecznym miejscu. • Monitor należy przechowywać z dala od źródeł wody lub wilgotnych miejsc, takich jak łazienki, kuchnie, piwnice i baseny. • Upewnij się, że monitor jest umieszczony na płaskiej powierzchni. Upadek monitora może spowodować obrażenia ciała lub uszkodzenie urządzenia.
Zawartość opakowania Lista zawartości opakowania • Nie wolno ciągnąć ani skręcać przewodu zasilającego na siłę. W przypadku zgubienia jakiejkolwiek części skontaktuj się z dystrybutorem. • Sprawdź, czy opakowanie monitora zawiera wszystkie części. Rysunki w niniejszej instrukcji obsługi służą wyłącznie do celów informacyjnych. •...
Instalacja Instalacja podstawy 1. Otwórz opakowanie, wyjmij produkt wraz z 2. Wyjmij główne części torby na akcesoria i umieść przymocowaną pianką i delikatnie umieść go na maszynę w dolnym pudełku z pianką. biurku lub stole. 3. Wyjmij trzon stojaka i podstawę. Jak pokazano na rysunkach, za pomocą śrub przymocuj trzon stojaka do podstawy.
Seite 60
Instalacja Instalacja uchwytu 1. Otwórz opakowanie, wyjmij produkt wraz z przymocowaną pianką i delikatnie umieść go na biurku lub stole. Zdejmij dodatkowe części i piankę zakrywającą monitor. Jeśli monitor był już przymocowany do stojaka, wyjmij stojak. 2. Wykręć oryginalne 4 śruby z otworu z tyłu monitora. Postępuj zgodnie ze wskazówkami dołączonymi do uchwytu, stojaka lub akcesorium i zainstaluj monitor na ścianie lub innym mocowaniu.
Seite 61
Regulacja monitora Kąt obrotu -15,0°(±2,0°) - +15°(±2,0°) Zakres regulacji wysokości Kąt pochylenia 95±5mm -5,0° - +15° Polski...
Instrukcja obsługi Opis przycisków Przycisk Funkcja Przycisk menu: Naciśnij, aby wejść do podmenu/szybko wejść do menu głównego. Przycisk w dół: Naciśnij, aby przejść w dół menu/szybko dostosować jasność Przycisk w górę: Naciśnij, aby przejść w górę menu/szybko przełączać sygnały wejściowe portu Exit (wyjście): Naciśnij, aby powrócić...
Seite 63
Instrukcja obsługi Podłączanie kabla: * Konfiguracja dolnego interfejsu z tyłu monitora różni się w zależności od produktów. * Uwaga: Jeśli kabel zasilający lub kabel sygnałowy jest uszkodzony, należy go wymienić na specjalne miękkie kable lub specjalne elementy zakupione w dziale produkcji lub konserwacji. Interfejs HDMI Interfejs RJ45 Za pomocą...
Seite 64
Menu OSD Opis menu * Kolor i kształt menu OSD rzeczywistego monitora może nieco różnić się od pokazanych na rysunku. * Specyfikacje menu OSD mogą ulec zmianie wraz z ulepszeniami funkcji bez wcześniejszego powiadomienia. * Menu ekranowe (OSD) może być używane do regulacji ustawień monitora i jest wyświetlane na ekranie po włączeniu monitora i naciśnięciu przycisku M.
Seite 65
Parametry Nazwa produktu Monitor LCD Model produktu C49SHC Rozmiar ekranu 49" (124 cm) Współczynnik proporcji obrazu 32:9 Kąt widzenia 178° (poz.)/178° (pion.) Podziałka pikseli 0.1038 (poz.) x 0.3114 (pion.) mm Współczynnik kontrastu 3000:1 (Typ) Kolory 16.7M Rozdzielczość 3840x1080 Maksymalna częstotliwość...