Protector SAM 1000 Montage- Und Bedienungsanleitung Seite 5

Than k you for purchasing the PROTECTOR
Power Failure Detector Mod. SAM 1000.
The SAM 1000 Power Failure Detector
y immediatel sounds an alarmin caseof power
failure. Its use is recommended
immediatenotificationof a powerfailureon a
c specifi deviceis required. T hePowerFailure
r Detecto automatically s ounds an alarmfor up to
12 hours. The alarm can be deactivated
immediatelyby meansof theRESET k ey.
HOW TO OPERATE THE DEVICE
I . Insertthe mainsplug of the deviceto be
connected into the socket of the SAM 1000.
2. Plac e theplugsafetycoverovertheplugof the
connected device and fasten with the screws
supplie d to prevent a ccidental r emoval o f the
plug . If theSAM 1000 is intentionally removed
from the socket, the device will sound the no
r powe alarm.2 differentplugsafetycovers are
included for all commercial plugs.
IMPORTANT : the device is off without this plug
safet y cover.Theplugsafetycovercloses the
circuit in the PowerFailureDetectorto supply
connecte d deviceswith power.
3. Insertthe mainsplugof theSAM 1000 in a
socket. The socket of the Power Failure Detector
nowprovides mainsvoltage,thegreenmains
voltageLEDlightsup and the built-in
rechargeabl e batteries startcharging(initial
chargin g timeapprox.24 hours). T heconnected
deviceis nowpowered.
wherever