Operating Procedure - Siemens LC855GB60/01 Gebrauchs- Und Montageanleitung

Operating procedure

The most effective method of removing
vapours produced during cooking is to:
❑ Switch the ventilator ON
as soon as you begin cooking.
❑ Switch the ventilator OFF
a few minutes after you have finished
cooking.
Display for
fan setting
Light Reduce fan speed
Fan – OFF –
Acoustic signal:
❑ When a button is pressed, this is verified
by an acoustic signal.
Switching off the acoustic signal:
❑ Simultaneously press buttons
Ü
and – until a signal is emitted after
approx. 3 seconds.
Switching on the acoustic signal:
❑ Repeat the process.
Switching the fan ON
Ü
❑ Press the + button.
Setting the required fan speed:
Ü
❑ Press the + button.
The fan speed is increased by one step.
Ü
❑ Press the – button.
The fan speed is reduced by one step.
18
Switching the fan OFF:
❑ Keep pressing the
Intensive setting:
Maximum power is obtained at the
intensive setting. It is only required for short
intervals.
❑ Keep pressing the
❑ If the intensive setting is not cancelled by
Lighting:
❑ The light can be switched on at any
❑ Adjusting the brightness:
Fan ON and
increase speed
0
–
Ü
fan switches off.
{
The displayed goes out shortly
afterwards.
Ü
appears in the display.
hand, the fan will automatically switch
}
back to step after 10 minutes.
time, even though the fan is switched off.
0
Hold down the + or
the desired brightness is obtained.
– button until the
ç
+ button until a
0
– button until