Werbung
PAIRING VIA USB-C RECEIVER
Only available for versions with receiver
1 USB-C
Plug the USB-C receiver into a USB-C port on
your computer or dock
USB-A
Insert the USB-C receiver into the USB-A adapter
Then plug the USB-A adapter into a USB-A port
on your computer or dock
2 Headset is already paired to the receiver
it ships with Just power on the headset
Once successfully paired, the light indicator on
the receiver will remain solid white Light indicator
on the headset will also turn solid white
PAIRING VIA BLUETOOTH
1
Long press the power button on earcup until LED
light blinking fast to initiate Bluetooth
2a For Windows
Place the headset close to your computer
and pair the headset via Swift Pair
When the Swift Pair notification shows
"Zone 305", select "Connect "
Only for native Bluetooth
You must connect to a Windows 11 computer
via the Swift Pair to enable Microsoft Teams
certification over native Bluetooth
see a Swift Pair notification, do the following:
i Pair your headset to the computer with
the method shown below in 2b
ii When paired successfully, the Swift Pair
notification should show up Select "Connect"
Note: Make sure "Show notifications to connect
using Swift Pair" is enabled in your computer's
Bluetooth
settings
®
®
pairing
®
version
®
If you don't
®
USB-C
USB-A
2 sec.
Bluetooth
New Zone 305 found
If this is your device, connect to it.
Connect
Dismiss
5 English
Werbung
