AEG GI87D91CB Benutzerinformation Seite 82

1 1
7. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
7.1 What to do if...
Problem
You cannot activate the appliance.
You cannot activate the appliance.
The lamp does not operate.
The brightness level or light colour
temperature is not as described in
the instructions.
The appliance does not absorb
enough vapours.
3. To install a new filter, perform the same
6.4 Replacing the lamp
This appliance is supplied with a LED lamp
and separate control gear (LED driver).
These parts can be replaced by a technician
only. In case of any malfunction refer to
"Service" in the "Safety Instructions" chapter.
Possible cause
The appliance is not connec‐
ted to a power supply or it is
connected incorrectly.
Lack of electrical power sup‐
ply.
The lamp is defective.
Incorrect Perfect illumination
setting.
The lamp is defective.
The motor speed is not ade‐
quate to the appearing va‐
pours.
82
steps in reverse order.
Remedy
Check if the appliance is correctly connec‐
ted to the electrical supply.
Check the fuse or the main switch. If the
fuse or the switch continue to break the cir‐
cuit, contact a qualified electrician.
Contact an Authorised Service Centre.
Touch the symbol to check if you are
able to change all three colour tempera‐
tures.
Contact an Authorised Service Centre.
Increase the speed of the motor.