Bluefin SUP PLAY AIR DOCK 7 Bedienungsanleitung Seite 5

I N F L A T I O N
P R O C E S S
● Unpack and unroll your PLAY AIR DOCK on a smooth, clean, flat surface.
● Inflate the PLAY AIR DOCK by first removing the valve cap. Firmly push the
valve pin inwards to make sure the valve pin is in the upper/closed position.
Firmly push the valve pin inwards and twist in either direction to make sure the
valve pin is in the upper/closed position.
● Connect your pump hose to the inflation valve on your PLAY AIR DOCK. Figure 1
● Before you begin to pump, please consult the recommended PSI on the valve(s)
of your PLAY AIR DOCK and inflate to the appropriate value. DO NOT
over-inflate your dock.
● The PSI may not register on your pump until you reach at least 7 PSI - keep
pumping!
● Once the desired air pressure has been reached, please safely disconnect the
air tap of your pump and secure the Valve Cap on your PLAY AIRDOCK.
EN
Figure 1.
4