delight smart solutions SMART-KINETIC Bedienungsanleitung Seite 2

2
USER MANUAL AND INSTALLATION GUIDE
PRODUCT INFORMATION:
The smart home system without compromising has arrived! Has it ever happened to you, that you' d forgot
whether you turned off the light or turned off any device and had to go back to check while heading to work?
You want to save energy and you don't want to keep all the electrical appliances in your home on standby,
for example, when you're not at home? You want to start your pump for irrigation remotely, you want to turn
on the LED strip with your smartphone? You're gone, but you want to maintain the illusion that someone is
at home, so you would turn on the light in different rooms? Take the comfort of your home to the next level!
The device can be conveniently controlled using our smartphone and Kinetic wireless wall switch (not
included) in accordance with today' s modern technology!
The product is compatible with the 55352, 55353 KINETIC switch products in the Delight product family, but
can also be used as a stand-alone smart device!
Its field of application can only be limited by our imagination. Can be connected to any electrical circuit
according to specification. You can check the status of your devices easily, quickly and from anywhere with
the free downloadable app, all you need is internet access.
ATTENTION! PRIOR TO MOUNTING, MAKE SURE THAT THE CIRCUIT IS DE-ENERGIZED!
PAY ATTENTION TO THE CORRECT CONNECTION, IF YOU ARE UNSURE, ALWAYS SEEK
PROFESSIONAL HELP!
The device can be controlled from several mobile devices, tablets or even the button on the device at the same
time, but you can also buy one or more wall switches, so the device can be connected from several points in
the apartment. It allows you to easily connect and sync multiple devices without modifying the power grid!
The product works with WiFi and 433 MHz technology, so it is not necessary to install a so-called Gateway
network device, it is enough if we have an Internet connection at home and have wireless access. (There is a
router and WiFi available)
OPERATION:
Any consumer with a power not exceeding 600 W (at 100 V-240 V AC (50 / 60 Hz) operating voltage) can be
connected to the control unit. Consumers connected to this control unit can be switched on and off using the
button on the top of the device. You can also control the device using one of the optional wireless KINETIC
switches. The control unit is easy to teach, it can handle several switches at the same time, so it can also be
installed as a toggle switch.