Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4 English
4. FROST
Frost can cause damage to the pump. The pump must be removed and
stored in a frost proof environment if the water is likely to freeze.
5. OPERATION AND FUNCTION
5.1. Model: Oasis-6000
Unroll the pump cable.
Connect the two pieces of the solar panel by plug-in the connect cable, adjust the panel bracket
to the right angle.
Connect the pump to the "pump" socket.
Choose a hose outlet that you want to see.
Place the pump underwater and make sure that, it is fully immersed in water.
The solar pump is now ready to operate.
Oasis-6000 only works when the solar panels are optimally aligned with the sun.
5.2. Model: Oslo 900, OXYGEN-3
Oslo 900 and Oxygen-3 only work when the solar panel is optimally aligned with the sun.
Note! The pump of the OXYGEN-3 must be placed outside the water and in a place protected
from moisture.
Construction of the pump housing
Model: Oasis-6000
Model: Oslo 900
Impeller cover
Impeller
Cover
Filter
Werbung
