Replacement Of The Fuse - Vention Fjgb0 Benutzerhandbuch

Replacement of the Fuse

Remove fuse ①.
Take out fuse ② and place it in the original position of fuse ①. The adapter should


now work again.

Alternatively, you can replace the fuse with a new one.

Fuse specification: 250Vac, 10A, 6.3mm x 25.4mm.
Note:

Ensure all devices are disconnected before replacing the fuse.

Confirm whether water has leaked from any equipment in the power source.

Check if the product is wet and if water has leaked out.
For more interesting information and events, please follow us on social media platforms:
Facebook
For warranty services or support, please contact the Vention team through:

Website: www.ventiontech.com

Email: vention@ventiontech.com
Linkedln
7
Instagram