Viking R33S Gebrauchsanweisung Seite 5

EN
Extension socket with USB Viking R33S - user manual
Thank you for choosing a VIKING product. Please refer to the technical specifica�ons of each model in the user manual or on the website
www.best-power.cz .
Before using
Please carry out a thorough check before each use.
Before connec�ng the plug of the extension socket to the mains socket, make sure that the mains parameters correspond to the technical specifica�ons:
- Look for the wa�age ra�ng on the devices to be plugged into the extension cord.
- Do not plug more than a specific number of wa�s into the extension socket.
- Make sure the device is switched off before connec�ng the extension socket to the mains.
- Do not pass the extension cord through doors, holes in ceilings, walls or floors.
- Do not remove, bend or adjust any metal pins or cable pins.
- Do not use the device with a damaged charging cable. The damaged cable must be replaced.
- Do not drive, pull or place objects over the extension cord.
Use
1. Completely unwind the cable of the extension socket.
2. Check the cable and connectors for damage or wear.
3. A�ach the extension socket to the desired pad and use the red wheel to secure it.
4. Turn the red wheel to a�ach or loosen it from the desired pad.
5. Plug the extension socket into the mains and press the ON/OFF bu�on.
6. To ac�vate the AC outputs, press the bu�on un�l you hear a "click" and then
the bu�on will light up white. The USB outputs are s�ll ac�ve, so there is no need to turn them on/off.
7. Make sure the device is switched off before plugging it into an extension socket.
Maintenance
When maintaining the extension socket, check the following things:
- Whether the extension socket is being used in accordance with its intended use.
- That the a�achment of the extension socket is secure.
- Dirt on the protec�ve insula�on.
- Damage to the cover - its seal or surface.
Contents of the package:
1 pc - Viking R33S USB extension socket
Warning:
Method of use and warnings:
1. Observe the following safety instruc�ons. Failure to follow the instruc�ons may result in personal injury and property damage. Failure to follow the
opera�ng instruc�ons, especially damage caused by safety and opera�ng instruc�ons, will void the product warranty. The manufacturer is not liable for any
consequen�al damages.
2. Before use, check that the power output of the connected equipment does not exceed the maximum value and avoid exceeding the output power of the
extension socket.
3. Do not touch or damage the components or expose them to electric current. There is a risk of electric shock. Make sure the extension socket is not
damaged before use. If the cable insula�on or sheath is damaged, stop using it.
4. Do not install this equipment during a thunderstorm with lightning. For indoor use only.
5. Do not use with aquarium equipment.
6. Never clean equipment when energized.
7. Unplug the extension cord from the power supply before cleaning.
8. Never immerse the equipment in water.
9. Protect from fire, prolonged direct sunlight and other heat sources to prevent overhea�ng and damage to the equipment.
10. This device is not intended for use by persons (including children) whose physical, sensory or mental incapacity or lack of experience and knowledge
prevents them from using the device safely.
11. Do not use a water fire ex�nguisher in case of igni�on! If necessary, only a dry powder ex�nguisher is suitable for the product.
12. It is strictly forbidden to alter, damage or obscure the logo and nameplate on the device.
13. This product is intended for indoor use.
14. Do not use the equipment contrary to its intended use.
15. Do not cover the equipment during opera�on.
16. Perform all opera�ons with the power disconnected.
17. Do not drive, pull or place objects over the cable.
18. Do not walk on the cable.
1
2
Product Descrip�on:
1. Bu�on
2. 1x USB-A output
3
3. 2x USB-C output
4. 3x Schuko socket
5. Cable 1.4, H05VV-F, 3G1.5mm²
4
BONA SPES s.r.o.