Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. Bluetooth mode
Enable the Bluetooth feature on your device.
1.
Find "Extreme Boom Pro" on the Bluetooth device and connect it.
2.
Once paired, you can see the status "connected" on your device.
3.
Press
to re-enter Bluetooth pairing if your device can't find Extreme
●
Boom Pro in 10 seconds.
This speaker can pair with 2 devices via Bluetooth simultaneously, but it can
●
only play music on one device at a time. To play from the other connected
device, pause the currently playing one first.
8. TWS (True Wireless Stereo) mode
Press the
on both Extreme Boom Pro to enter into TWS pairing.
1.
Once paired, the LED of the primary speaker turns solid white, while the
2.
second speaker turns to flash white.
Find "Extreme Boom Pro" on your Bluetooth device and connect it.
3.
If 2 smart devices are connected, and you want to play via TWS mode, press
●
to enter into TWS pairing, meanwhile, the current playing device will be
disconnected.
In TWS mode, if you want to play via PartySync mode, press
●
mode first.
9. PartySync mode
Turn on one speaker and get it paired with your device. Then press and
1.
hold
for 3s to enter the PartySync mode. The speaker will be the primary
speaker and the LED comes solid white.
Turn on the other speaker(s) and long press
2.
The speaker(s) will be the secondary speaker(s) and the LED comes off.
If 2 smart devices are connected, and you want to play via PartySync mode,
●
press and hold to enter into PartySync pairing, meanwhile, the currently
playing device will be disconnected.
In PartySync mode, if you want to play via TWS, press and hold
●
PartySync mode first.
The
on secondary speaker can't be controlled under PartySync mode.
●
10. Use your speaker with Echo Dot
You can connect the Dot with the speaker by Bluetooth.
Please follow the steps to set up via Bluetooth:
Download the Alexa app and follow the steps to set up the procedure to get
1.
the Dot connected to your home Wi-Fi network.
Switch the Extreme Boom Pro to Bluetooth mode, you can press the power
2.
button to re-enter Bluetooth pairing.
Run the Alexa app, tap Menu, and then tap Settings.
3.
Tap the Echo Dot in your list of Alexa devices, then tap Bluetooth.
4.
The Extreme Boom Pro should appear in the list of Bluetooth devices. If not,
5.
please press the power button and try again.
Once listed, tap on the speaker to complete the pairing process.
6.
To remove the device, return to Bluetooth＞tap the name of the speaker＞
7.
tap "Forget Device"
Note:
Voice command will not be able to turn on/off the speaker if you connect to it via Bluetooth.
11. Safety instructions
Avoid dropping or hitting the speaker.
Avoid exposing to extreme temperature.
Avoid using the speaker near a microwave.
Never disassemble or repair the speaker.
Never use any corrosive cleanser/oil to clean.
Never leave the speaker in a car parked in the sun.
Never attempt to charge the speaker while it is wet.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.This device
complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada's licence-exempt RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference.
1.
This device must accept any interference, including interference that may
2.
cause undesired operation of the device.
This equipment should be installed and operated with a minumum distance of
20 cm between the radiator and your body.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
auxappareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter toutbrouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre lefonctionnement.
CAN ICES-3(B)/NMB-3(B)
L'appareil a été évalué pour répondre aux exigences générales d'exposition aux
RF. Le dispositif peut être utilisé sans restriction dans des conditions portatives
d'exposition.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm
entre le radiateur et votre corps.
to enter the PartySync mode.
to exit TWS
to exit
Werbung
