Battery Installation; Product Specifications - Entac Es-3S-Rc Benutzerhandbuch

EN USER MANUAL
B. BATTERY INSTALLATION
1. Open the battery cover
2. Remove the battery cover
3. Install the battery and cover
4. Lock the battery cover
5. Install the battery correctly
a. CR2032
b. Positive pole
c. Battery Compartment
d. Negative pole
6. Remove the battery correctly
7. Install the battery incorrectly
8. Short circuit
C. PAIRING
1. Plug the remote control socket into the outlet.
2. Press and hold the on/off button till the indicator starts to flash slowly and then release the button.
3. Press the "A"ON button of the transmitter, the indicator light of the remote control socket is always on, and the pairing is
successful. (For "B"ON."C"ON pairing in sequence, please refer to the "A"ON pairing steps)
a. Indicator light
D. HOW TO USE
1. Remote control operation method
Example: Press the "A"ON key to turn on the device, and press the "A"OFF key to turn off the device.
Example: Press the "ALL ON" key to turn on all devices. Press the "ALL OFF" key to turn off all devices.
a. Indicator light
b. ON
c. OFF
d. All ON
e. All OFF
2. If the transmitter is lost or the battery is insufficient, please operate the socket by manual.
a. Press the button to turn off the socket.
b. Press the button to turn on the socket.
E. REMOVE PAIRING
1. Press and hold on/off button of the remote control socket (the process is about 20S), then release it and the remove pairing
operation is completed.
F. PRODUCT SPECIFICATIONS
1.
Remote Control Socket:
Operating voltage: 230V~ 50Hz 10A
Max rated power: 2300W
Working distance:up to 40m (outdoor open area)
Frequency: 433.92MHz
Indicator Color: Red
Working temperature: 0°C~35°C
Usage: Indoor
2.
Transmitter:
Frequency: 433.92MHz
Working temperature: 0°C~35°C
Working voltage: 1x3V CR2032
Standby power consumption: <5µA
Transmit power: <2dBm