Werbung
External controls
1
Power button/OK Key
2
Four directions key
Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices.
Hand scanning sensor light
Turn on the lights:
1 . Swipe your hand on the lower edge of the screen to turn on the reading light;
2 . Touch the switch , it can also be turned on;
Turn off the lights：
1 . When the light is turned on , swipe your hand on the lower edge of the screen ,
it will turn off；
2 . When the light is turned on , touch the switch again , the reading light will be
turned off ；
3 . After using the touch switch to turn off the reading light ,
the hand scan cannot be activated；
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and receiver.
•
•
Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of
EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU and Directive 2009/125/EC with
regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.
Notice: Peripheral devices
1
2
a.
Power on; Press more than 5 seconds to turn off the power.
b.
Press to view the home page. Press again to go to the next function in the
function menu.
a.
Press to any directions key to display first menu.
b.
The four directional buttons on the back of the monitor are like a joystick.
To move the cursor, just toggle buttons in four directions. Press the button
to select the desired option. Red indicates operational.Grey indicates
inoperable.
Hand scanning sensor light
TV reception.
Werbung
