Werbung
NATURAL
MODE
This function
creates
an air current
that
feels
like an outdoor
breeze.
To activate this function, press the mode
button
on the remote
control
or control
panel until the corresponding indicator
lights upS.
The fan speed will vary according to a
pre-set cycle.
To change mode, press the button again
The corresponding
indicator goes out on
the control panel.
NIGHT
MODE
This function
provides a quick burst of
freshness, starting by default at speed 5
and gradually decreasing every 15 min until
finally reaching silent mode.
The startup speed can be adjusted using
the "+" and "-" buttons.
To activate this function, press the mode
button
on the remote
control
control panel until the corresponding
indicator lights upC.
To change mode, press the button
agai
n
e
The corresponding
indicator goes
out on the control panel.
22
Mod
OFF
Mod
Mod
Mode
OFF
Mod
MEMORY
The fan remembers the last speed or mode (Natural or night) used.
MODE
SILENT
xl
Ourfan's silent mode automatically gives you the best ratio between performance and silence.
During quiet moments, you can enjoy pleasant refreshment in total silence.
Toactivate thisfunction, press thebuttononce.O
TIMER
-12
5s
OFF
Setting the timer:
You can set the timer for your fan with your
remote control or the control panel.
Press the button to enter the programming
mode
. The display will flash.
Using the "-" and "+" buttons, you can set the
time until the appliance switches off to I to
12 hours.
After
3 seconds
the time
is validated
and
the countdown started. The display stops
flashing and returns to its normal state.
Please note: Setting the time to "00" in the
programming mode disables the timer.
23
Werbung
