SMART ST6 PRO Bedienungsanleitung Seite 4

1.Charging and Activation
a.Connect the ST6 PRO charging cable to a 5V-1A
adapter and plug it in. Ensure proper alignment of the
cable with the metal contact pins on the back cover of
the watch. The built-in magnets will automatically
attach to the correct poles for charging.
b.If the watch is newly received or has not been used
for a long time, the battery may be in a 0 voltage
protection state. Charge the watch for at least 15
minutes to accumulate enough power to activate
it.The built-in magnets will automatically attach to the
correct poles for charging.
c.It is recommended to charge the device once a
month. Keep the device fully charged and power it off
when not in use to ensure longevity and optimal
performance.
1