CMP HT0149 Bedienungsanleitung Seite 9

Output 3.0 / 2.22 /
current 1.67
Output 15.0
power 20.0
Average 84.09
active
efficiency
Efficiency 78.08
at low
load (10
%)
In cases where more than one
physical output or more than one
output voltage at load condition 1 are
measured, the sets of available
Output voltage — Output current –
Output power shall be published.
A Nameplate output current.
In cases where more than one
physical output or more than one
output voltage at load condition 1 are
measured, the sets of available
Output voltage — Output current –
Output power shall be published.
/ W Nameplate output power.
In cases where more than one
physical output or more than one
output voltage at load condition 1 are
measured, the sets of available
Output voltage — Output current –
Output power shall be published.
% Declared by the manufacturer based
on
arithmetical mean of efficiency at
load conditions 1-4.
In cases where multiple average
active efficiencies are declared for
multiple output voltages available at
load condition 1, the value published
shall be the average active efficiency
declared for the lowest output
voltage.
% Declared by the manufacturer based
on the value calculated at load
condition 5.
External power supplies with a
nameplate output power of 10 W or
less shall be exempted from this
requirement.
In cases where multiple average
active efficiencies are declared for
multiple output voltages available at
load condition 1, the value published
the value calculated as