ORTHOSERVICE RO+TEN Sensitive litecross90 Bedienungsanleitung Seite 18

PUTTING ON THE APPLIANCE FOR THE PATIENT REF. 1092
Shoulder corset in Sensitive
1 Open the corset and temporarily fasten the Velcro
Put the corset in place with the loop on the upper side.
2
Insert your thumb in the loop and fasten well the central Velcro
3 Make sure the closure is centered. If necesarry reposition the corset (fig. B).
4
Tighten the corset by fastening the lower straps on the front Velcro
(fig. C) first.
5 Then tighten the upper straps and fasten them on the front Velcro
6 Place the upper tensioning straps over the shoulders, then feed under the arms
and cross over at the back. Make sure they go through the loops (fig. E).
Then secure them to the front Velcro
fabric
®
straps on the side.
®
band (fig. F).
®
closure (fig. A).
®
band
®
band (fig. D).
®