ORTHOSERVICE RO+TEN Sensitive litecross90 Bedienungsanleitung Seite 16

PUTTING ON THE APPLIANCE FOR THE PATIENT REF. 1090/1091/1093
Sensitive fabric low/high corset
®
1 Open the corset and temporarily fasten the Velcro
2
Put the corset in place with the loop on the upper side.
3 Insert your thumb in the loop and fasten well the central Velcro
Make sure the closure is centered.
4
Tighten the corset by fastening the straps on the front Velcro
ONLY on models REF. 1091: first tighten the lower straps, then the top ones.
5 If the use of the lumbar pad (REF. 1078/P or REF. T1000, both optional)
is prescribed, fix the pad on the inside to the back Velcro
the corset on.
straps on the side (fig. A).
®
closure (fig. B).
®
band (fig. C).
®
before putting
®