ZTECHNIK Z2225 Kurzanleitung

Attention
Special notes and cautionary measures which
can prevent damage to the accessory or
motorcycle.
TOOLS REQUIRED:
Allen Wrench, 3mm
Box End Wrench, 10mm
PARTS LIST
Index Description
1 Windshield, Quantum Coated Lexan® polycarbonate 1
Kit-Z2225
2 Bracket, Left
3 Bracket, Right
Bag #780
4 Back Plate
5 Button Screw M5 x 20
6 Button Screw M6 x 20
7 Nut, M5
8 Wellnut, M6
9 Gasket, Windshield
10 Gasket, Bracket, Outer
11 Gasket, Bracket, Inner
INSTALLATION
Right and left side of motorcycle is deter-
mined while sitting on the bike.
1. Remove the stock windscreen from the OEM mount.
Keep mount bracket in place.
Stock windscreen mount also functions as
gauge mount and must stary on the motorcycle.
2. Install the right side bracket to motorcycle as shown in
figure 1. (3mm Allen Wrench, 10mm Box End Wrench)
3. Repeat on left side of motorcycle.
4. Install Windshield to Brackets as shown in figure 2.
(3mm Allen Wrench)
5. Tighten the screws firmly.
708-343-0400 / Fax: 708-343-0625 / www.Z Technik.com / e mail: info@Z Technik.com
©2006 National Cycle, Inc.
Qty.
37-378302-000 1
37-378303-000 1
37-378304-000 2
51-516220-000 4
51-516323-000 4
42-423050-000 4
42-472001-000 4
75-762420-000 2
75-762421-000 2
75-762422-000 2
ZTechnik PO Box Maywood, IL 60153-0158 USA
INSTALLATION AND OWNER'S MANUAL
Z2225 Replacement Windscreen for K1200 R
Dark Tint Quantum Coated Lexan® Polycarbonate
Note:
Tips for facilitation of operation,control and
adjustment, as well as maintenance work.
MAINTENANCE
Cleaning: Wash with a clean soft cloth, plenty of warm
water and, if necessary, a non-abrasive soap such as
dishwashing liquid. Flannel or soft chamois make good
cleaning cloths.
Paint, glue residue removal: Moisten cotton with a
small amount of Naphtha or Turpentine followed by a
wash as above. Do not clean polycarbonate in hot sun
or high temperatures. Do not clean the screen with
glass cleaners. Do not use rain protective products on
the screen. The solvent action of the alcohol in these
products will destroy the screen. Do not allow brake
fluid, alcohol, or strong solvents to contact the screen.
Figure 1
3
5
4
7
Page 1 of 1
6
8
Figure 2
11
10
10-119740-000 04/06
9