Nexx X-COM 3 Pro Bedienungsanleitung Seite 50

13.2 SOFTWARE CONFIGURATION SETTING
You can change the settings of the headset through the Sena Motorcycles
App or the NEXX Device Manager.
Sena Motorcycles
13.2.1 Headset Language
You can select or change the device language, which will stay saved even if
the headset is rebooted.
13.2.2 Mesh Reach-Out (Default: Disable)
If the Mesh Reach-Out is disabled, a Mesh Reach-Out request message
cannot be sent or received.
13.2.3 Audio Equalizer (Default: Music Balance)
Increase or decrease the decibel level of different frequency ranges of audio.
• Music Balance will adjust frequency response that gives the most natural
balance between lows, mids, and highs.
• Music Enhanced will lower midrange frequencies slightly.
• Voice will increase midrange frequencies of the human voice and cut
environmental noise for better clarity with voice communication.
• Bass Boost will increase the bass range of audio (130 Hz and below).
• Treble Boost will increase the high range of audio (6 kHz and above).
13.2.4 Audio Boost (Default: Enable)
Audio Boost increases the overall maximum volume. If Audio Boost is
enabled, Audio Equalizer will not be effective at the maximum volume and
only work below the maximum volume. If Audio Boost is disabled, Audio
Equalizer will work across all volume ranges.
X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM WITH MESH INTERCOM
NEXX Device Manager
50