Installation - Woox R7305 Kurzanleitung

Installation

Install via screws
Step I: Fix bracket to the wall with provided
screws,
• If you're installing on a hard surface such as
concrete stucco, or brick, use suitabletools
to drill two holes in your wall. and push the
provided plastic plugs into these holes.
• If you're Installing on wood. use the screws
directly.
Step 2: Place the smoke alarm on the mounting
bracket and rotate clockwisely to fasten it.
Install via 3M gum
Step 1: 3M gum to fix
the baseplate onto the
ceiling.
Step 2: Mount the alarm
onto the baseplate.
-1
Step 3: rotate to
fasten it.