ENERMAX SquA RGB Kurzanleitung

X @ENERMA
Product model. UCSQARGB12P-BP3
o
Chapter 1 — Specifications
Model Number
Dimension (mm)
Speed (RPM)
Air Flow (CFM)
Air Flow (mY/h)
Static Pressure (mm-H20)
Minimal Noise (dBA)
Rated Current- Fan (A)
Rated Current- ARGB LED (A)
Rated Voltage (V)
ARGB Rated voltage (V)
MTBF (hours)
Connector lx 4 pin PWM connector,
Accessory
Product specifications are subject to change without prior notice
For detailed information, please visit our website at
Chapter 3 Fan Pack Installation
Use PWM 3 to 1 cable to connect 3 fans,
then connect the fan connector to the
PWM header on the motherboard
cable •
PWM Header
PWM 3 tol Cable
3 FAN
User's
o
UCSQARGB12P-BP3
120(W) x 120(H) x 26(D)
300 - 1500
24.53 - 68 27
41 67 - 115.99
0.17 - 1 898
12 - 23
021
0 68
12
5
—-100,000 hours @ 250C
lx 4 pin ARGB connector
lx RGB control box, lx ARGB 3 to 1 cable (5V/D/-/G),
lx GIGABYTE ARGB adapter, lx PWM 3 to 1 cable,
lx Molex adaptor, 12x Screw
enermax com
Guide
a Fan
PACK
Manual
0 2019 ENERMAX TECHNOLOGY CORPORATION. All right reserved.
Specifications are subject to change without prior notice. Some trademark may be claimed as the property of others
Chapter 2 — Part List
Fan x 3
PWM 3 tol
Cable x 1
(5V/D/-/G)
•Noticer Actual specifications product parts may vary according
Integrated RGB Control Box *
RGB
ARGB 3 to 1 Cable
Caution: Max.
Addressable Motherboard Sync
Please ensure
@ENERMAX
pouvEm DESIGN.
RGB Control Box x 1 Contorl Box
Cable (SATA) x 1
GIGABYTE Molex Adapter
ARGB Adapter
to different regions or
Control Box
Contorl Box Power
Cable (SATA)
current Of RGB Control Box is 3A
G For RGB lighting
demonstrate
1. Integrated
2 Addressable
Addressable RGB
Header
Motherboard
it is properly the connector to the motherboard
power ARGB 3 to 1 cable
o
Screw x 12 Magnetic
Adhesive x 1
(For Control Box)
PSIJ(not included in the package)
Sync, two ways to
the lighting
RGB Control Box.
Motherboard Sync
O
included in the package)