Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting
Fig. 2
Amplifier loudspeaker outputs (example).
4
Note
• With every connection system, ensure that the contact is tight and has a proper
contact area.
• Connectors with similar gold plating as the Sapphire binding posts will typically offer
the best results and remain corrosion-free.
• Please ensure that the positive and negative cables do not make contact with each other.
• Tighten the posts, and check the contact after a few days to make sure that it has not
loosened.
2. Connect the other cable ends to the loudspeaker outputs of your switched off power
amp (see Fig. 2).
Note
Pay attention to the correct polarity of both loudspeakers. With most loudspeaker cables
one of the two veins is characterized for better distinction:
Connect the red marked post of the speaker to the red marked output of the amp (+),
and the white or black marked post to the white or black marked output (–) accordingly.
Bi-wiring/bi-amping
Dynaudio loudspeakers feature a carefully fine-tuned cross-over, optimized using
selected parts and an advanced circuitry to achieve a truly balanced and smooth
frequency response. Therefore, dividing the frequency sections through bi-wiring or
bi-amping is neither beneficial nor optional.
Choice of loudspeaker cable
The impact a loudspeaker cable can have on sound quality may be dramatic, though in
general quality cable products will yield a quality result.
Dynaudio loudspeakers are designed to be very neutral and thus are not extremely suited
to any particular type of cable. The choice of cable is as much a factor of matching the
cable to the entire audio system. Please consult your Dynaudio dealer for information
about compatible loudspeaker cables that will suit both your electronics and the Sapphire
loudspeaker.
Dynaudio Sapphire
Werbung
Inhaltsverzeichnis
