Abask J05 PRO Bedienungsanleitung Seite 8

Quick Start Guide
3.
Installing the camera
1.Check if the memory card is in the camera.
2.Attach the suction cup bracket to the camera.
3. Plug the charging cable into the USB port of the camera,
and then plug the adapter into the cigarette lighter socket of
your car. Start the car and the camera will turn on
automatically.
Setup Initial Menu
4.The blinking red dot on the screen means the camera is
recording video, Press the [ OK ] key to stop the recording
and press the [ Menu ] key to enter the system menu.
1). Set the language. Press the [ down ] or [ up ] button to
select the language option and press [ OK ] to enter the
language setting.Select your language, press [ OK ] button
to confirm and return to the system menu.
2) Set the date and time. Press the [ down ] or [ up ] button
to select the [date / time] option, and press OK to enter the
setting. Press the [ down ] or [ up ] button to adjust the
number, press [ OK ] to confirm and go to the next item.
Press [ OK ] to return to go back
3）Format the memory card. Press the [ down ] or [ up ]
button to select[ Format] option, press [ OK ] to enter the
setting. Select "confirm", press [ OK ] again to confirm the
formatting and return to the system menu.
5. Press [ Menu ] to return to recording mode. The camera
will start recording automatically.
4