Training; Safety Instructions; Work Area Safety; Electrical Safety - Hecht 445 Betriebsanleitung

C Keep these instruction manual and use them whenever you need more information. If you
don´t understand some of these instructions, contact your dealer. If the product is lent to
another person, it is necessary to lent this instruction manual with it.

TRAINING

C All operating personnel must be adequately trained in the use, operation and setting and
especially familiar with prohibited activities.
• Never allow use by children or people unfamiliar with these instructions. Local regulations may specify
an age limit of the operator.
• This product is not intended for use by persons with reduced sensory or mental capacity or lack of
experience and knowledge - unless they are under the supervision of the person responsible for their
safety or if this person has instructed how use this product. The product is not intended for use by
children and persons with reduced mobility or poor physical disposition. We strongly recommend to
pregnant women to contact her doctor before use of this product.
• Respect national/local regulations regarding working time (please, contact your local authority).

SAFETY INSTRUCTIONS

• Know your tool. Read owner's manual carefully. Learn its applications and limitations as well
as the specific potential hazards related to this tool. Familiarise yourself with the controls on
the machine and how to use them.
• Be careful at work, be concentrated on actual work, and use the common sense.
• An inattention during work may result in loss of control over the machine.
B
WARNING!
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious
injury.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.

WORK AREA SAFETY

a. Keep work area clean and well lit.
b. Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
c. Keep children and bystanders away while operating a power tool.
to lose control.

ELECTRICAL SAFETY

a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
There is an increased risk of electric shock if your body is earthed or grounded.
refrigerators.
c. Do not expose power tools to rain or wet conditions.
the risk of electric shock.
Cluttered or dark areas invite accidents.
Power tools create sparks which may ignite the dust or fumes.
Distractions can cause you
Unmodified plugs and matching outlets will
Water entering a power tool will increase
EN
DE
CS
SK
PL
HU
13 / 25