TAKARA RDU 1705 Bedienungsanleitung Seite 13

Installation Precautions:
1. This unit should be installed by professional
personnels, if possible.
2. Please refer to the instruction
electrical application,
operation will cause damage to the unit.
3. Apply the power cord after all connections
the unit are set.
4. Insulate all exposed wires to avoid short circuit.
5. All loosen wires shall
6. Read carefully for the application
instructions for each part before installation.
7. The unit is designed for 12-15 V
negative.ground operation system only,
make sure your vehicle is connected to such
negative ground electrical
8. Be sure to connect the unit in exact according
to the lead-diagram, otherwise
malfunctions or damages wouls be possible.
manual for
wrong
Of
be fixed after installation.
and operating
system.
Set key