IMOU Smart Robot Vacuum Cleaner Serie Schnellstartanleitung Seite 3

DE
Instructions Before Cleaning
EN
Remove plugs and power cords that
could entangle the robot.
Preparation Before Using
1
Remove Protective Materials
Place the robot on a at surface and
then remove all protective materials on
the robot.
Remove
Cleaning System
1
Start
Press to start Auto cleaning.
Press and hold for 3s to start Spot
cleaning.
Mopping
1
Uninstall the Water Tank
Press the release button on the dust box to
remove the water tank.
Connect to Imou Life App
Before setting up the device, please make sure that the 2.4 GHz band Wi-Fi is enabled on
your router.
Set Up the Device
Scan the QR code below or search for "Imou Life" in the app store to download and install the app.
Open Imou Life app, tap + on the right upper corner of the page to add your device.
Device adding processes vary between di erent versions of the app. Please follow the
instructions in the app that you are using.
Fold the carpet tasseled edges under to Put the weight scales out of the area to be
improve the cleaning e ciency. cleaned.
2
Charging Dock Placement
Place the charging dock on a at ground against the wall.
Keep the area around the Charging Dock clear of objects.
2
Pause
During cleaning, press or to
pause cleaning.
i
The Robot enters sleep after it is
paused for 60 minutes. Press or
to wake up the robot.
2
Install the Mop Bracket
Download on the
GET IT ON
Do not use the robot on wet surfaces or
oor with standing water.
3
Charge the Robot
Press and hold
back to the Charging Dock to charge. The robot will enter standby mode when it
is fully charged.
For the rst-time cleaning, please ensure that the Robot is fully charged.
The Robot automatically returns to the Dock to charge when its battery is low.
It resumes cleaning from the last cleaning spot after the Robot has enough
power.
3
Automatically / Manually Recharge
Auto-recharge: Low battery during cleaning. / Cleaning
completed.
During cleaning, press or to pause cleaning.
Press again, the robot returns to the charging dock
and recharge.
3
Add Water
Puri ed water is recommended. To prevent corrosion
on metal components, please do not use detergent.
Reset Wi-Fi and Reset the Device
Remove the Robot from the Charging Dock, press both
for 5s until the indicator ashes white fast to o .
When the device is powered o , press
When you hear the prompt sound, follow the instructions on the app
to add the device.
Features
You can view map, set no-go areas, con gure rooms, adjust suction
power and water volume, rmware updates and more in Imou Life app.
Use the app to enjoy all available features.
01
Put away the mops or pieces of paper on
the oor.
for 3s to power on the robot. Press
Charging
Fully charged
4
Power O
When the Robot paused, press and hold
3s to power it o . The LED indicator ashes white
fast to o .
During charging, the Robot can not be powered
o or enters the sleep.
4
Mop
Press to start Auto mopping.
Press for 3s to start Spot mopping.
Robot Vacuum Cleaner
98
%
and
for 3s to power it on.
Auto
Start
to send the robot
White ashing slowly
Solid white
for
3s
16 23
m 2 Min
Room Zone
Charging