Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
6
Grille
NOTICE Spraypaintingis highlyrecommended as brushpainting
may clog the grille holes.
•
Place
on an even
Apply paint as necessary with a minimum
Step 3:
Paint
Mask
Template
Press the outer circle out of the cut-out template.
•
Attach the template to the mounting surface.
•
Mark the cut-out
•
Cut-out
the
hole.
Step 4:
NOTICE
The speaker cables should be stripped 1/2in (12 mm)
minimum.
The endings should be twisted to a single strand.
It is important to make the connection using the correct polarity.
Black
Amplifier/receiver
Press the button on the terminal to open the clamp.
Insert
the strand
•
surface.
late
area through the template.
Red
1/2in
12 mm
of the
cable
and
release
of 2 thin coats.
Red
Black
the
button.
Werbung
