Driver Installation; For Windows - Speedlink Sl-6695 Bedienungsanleitung

2. Connecting to a PC
System requirements:
• IBM PC
• Windows 98SE or higher
• Free USB port
• 20MB free hard disk space
• DirectX 8.0 or later
I . Connect the pedals to the steering column
2 Connect the power supply cable to the steering column
8. Connect the USB plug to the IJSB port of the PC
Note:
I . USB operation is not supported by Windows 95/ NT
2 Do not connect the steering wheel to a USB hub It only works when
connected directly to the IJSB port of the PC.

2.1 Driver installation

1 The wheel has to be connected to the PC first After that Insert the supplied
drivers CD in your CD-ROM drive.
2 If the installation program
"Start/ Run/ Browse" and select your CD-ROM drive
Double click on the file "setup. exe"
8
4. If a request for a digital signature for Windows appears, acknowledge the
message to continue with the installation ary„vay.
5 After installation is completed,
After installation is completed, select "Start/ Settings/ Control Panel". Double
click on "Game Controllers" or "Gaming options" (depends on operating system)
In the window that opens, your steering wheel should be listed with status "0K"
Click on "Properties" to test the steering wheel
It is unnecessary to calibrate the steering wheel. The steering wheel supports
dynamic calibration, which is carried out automatically when plugging in the
device.

for Windows

98 and higher
does not start automatically.
restart the PC
7
click on