SPEEDLINK SL-5251 Kurzanleitung
Quicklinks
Step 4/4
Schritt 4/4
•
Applying the
Screen Protection
Anbringen der
SL-5251
Schutzfolie
© 2012 Jöllenbeck GmbH.
All rights reserved. SPEEDLINK
, the SPEEDLINK
®
word mark and the SPEEDLINK swoosh are registered
2
trademarks of Jöllenbeck GmbH. Jöllenbeck GmbH
D
shall not be made liable for any errors that may appear
in this manual. Information contained herein is subject
to change without prior notice.
All trademarks are the property of their respective
Peel off mask 2
owner. Please keep this information in a safe place for
after the application is completed.
later reference.
Entfernen Sie Abdeckung 2 nach dem
JÖLLENBECK GmbH, Kreuzberg 2,
Anbringen der Schutzfolie.
27404 Weertzen, GERMANY
PROTECTION
FOILS
Verwandte Anleitungen für SPEEDLINK SL-5251
Inhaltszusammenfassung für SPEEDLINK SL-5251
- Seite 1 All rights reserved. SPEEDLINK , the SPEEDLINK ® word mark and the SPEEDLINK swoosh are registered trademarks of Jöllenbeck GmbH. Jöllenbeck GmbH shall not be made liable for any errors that may appear in this manual. Information contained herein is subject to change without prior notice.
- Seite 2 Step 1/4 Schritt 1/4 Step 2/4 Schritt 2/4 Step 3/4 Schritt 3/4 • • • Please note that the protective Peel off mask 1 carefully and take Align the protective film (D) is enclosed by two masks (1+2). care not to touch the adhesive side. film (D) with the edges of the screen and plane it with the applicator.