tacwise A11 Eco Betriebsanleitung Seite 2

A11 Eco Hammer Tacker
EN
Operating Instructions
For models: 0322, 1179, 1185, 1778, 1783
Continued...
Warning/Caution
• The operator and persons in the vicinity of the tool should wear
CE or UKCA approved eye protection/goggles.
• Do not go through the motion of firing unless the tool is aligned
to the workpiece, as this could pose a risk of injury to others.
• Only use Tacwise staples as others may cause jamming
or damage to the tool.
• Store out of reach of children and pets.
• Keep your work area clean and well lit.
• Always watch what you are doing and use common sense.
• Do not wear loose clothing or jewellery that can get caught
on the tacker.
• Do not swing the hammer tacker in the direction of others
• Be aware of the materials that you are stapling – watch out
for potential hazards
• Do not overreach; keep proper footing and balance at all times
• Do not use this tool to fasten electric cables. This tool is not
designed for the installation of electric cabling and may damage
electric cables, which could lead to injury by electric shock or
fire hazards.
Guarantee
All Tacwise tackers are carefully checked, tested and subject
to the stringent controls of Quality Assurance. Tacwise therefore
offers the following guarantee. Your warranty claim based on
your sales contract with the retailer, including your statutory
rights, shall not be affected by this guarantee.
Product advice & technical support
If you have a problem with your Tacwise hammer tacker,
email: service@tacwise.com
Staples jammed in tool
• Use genuine Tacwise staples as specified
for the tool.
• Ensure the staple type and length
is suitable for the material.
• Clear/clean the magazine
and staple mouth.
One month guarantee
If you are not completely satisfied with the performance
of your product or it is faulty or damaged on purchase,
then we will exchange the product or issue a full refund
within 28 days of purchase. Proof of purchase must be
produced with an original receipt and the tacker must
be returned complete as purchased to the point of
purchase. This does not affect your statutory rights.
Tacwise Group Plc, England.
Rapesco-Tacwise BV, Netherlands.
tacwise.com
Tacwise Group Plc, Unit 1 Connections Business Park, Otford Road, Sevenoaks, Kent, England TN14 5DF
Rapesco-Tacwise BV, Kraijenhoffstraat, 137A, 1018RG Amsterdam, Netherlands.
Troubleshooting
Follow the instructions below if your tool seems not to operate
properly. If this does not solve the issue, please contact:
service@tacwise.com
Tool does not fire staples
• Load staples into the magazine.
• Use genuine Tacwise staples as specified
for the tool.
• Clear/clean the magazine and staple mouth.
• Check the magazine pusher is firmly secured
into the end of the tool.
Three-year standard warranty
Should your Tacwise hammer tacker become defective due to
faulty materials or workmanship within 36 months from the date
of purchase, we guarantee to replace, at our discretion, the tool
free of charge. This warranty does not cover:
• Tools that have received unauthorised changes or additions.
• Defects caused by accessories, components, spare parts
or staples which are not genuine Tacwise brand.
• Component parts that are subject to natural wear and tear
caused by use in accordance with our operating instructions.
• Proof of purchase must be produced with an original receipt.
Tool does not drive the staples fully
• Choose the appropriate staple length for
the material.
• It may be necessary to use more force
when firing the tool.
09/24