EuroLite DXT PoE Node I Bedienungsanleitung Seite 14

Getting started
Installation
Setup the device on a plane surface or fasten it with the
optional mounting brackets.
Network connection
Connect the device to the LAN port of the computer or to a
48V POE Ethernet switch (min. 802.3af). At least a Cat-5e
cable should be used for this.
Power supply
The device can be supplied
connection (POE switch or injector). Alternatively, a USB
power source (5V/1A) can be connected to the USB-C
socket. A USB cable is included in the scope of delivery
DMX connection
Connect your DMX512 devices to the DMX output or use a
male-male XLR adapter
Switching DMX Out/ln is done via the website,
accessible via the IP of POE Node I (default: 192.168.001.
020)
14 English
with power via the network
to connect a DMX signal source.
which is