ZAPTEC Sense Installationsanleitung Seite 7

Installation
1. Plug Zaptec Sense
port E with the included cable
3 minutes while the device is booting. Move to the next step
when Zaptec Sense starts blinking orange.
2. Download the Zaptec app from App Store or Google Play.
Create an account or log in.
3. To install Zaptec Sense, tap the three dots
corner of the Dashboard screen and select Install Product.
4. Scan the QR-code on the back of Zaptec Sense
or this manual. Follow the on-screen instructions.
5. Once the light indicator on Zaptec Sense changes
to continuous white, the installation is complete.
Configuration
If you need to change network settings after installation,
hold your phone near Zaptec Sense, open the Zaptec app
and tap the three dots to configure Zaptec Sense.
G into the energy meter's HAN/P1
F and wait for at least
H
I in the upper right
English
7