SUNBOUNCE SSW-BIG Aufbauanleitung

9. Stecken Sie nun den BOOM-STICK in die Öffnung des GRIP-HEAD und ziehen Sie die
Aufbauanleitung
Schraube fest.
Operating Instructions
10. - 11. Führen Sie jetzt den separaten gelben Gurt mit durch die mittlere Öffnung des langen
schwarzen Spanngurtes. Schlingen Sie den Gurt dann um das vorletzte Glied Ihres BOOM-
STICKS (Stativs), direkt unterhalb der obersten Befestigungsschraube.
SUN-SWATTER BIG
12. Sie können nun über die Länge des letzten Gliedes des BOOM-STICKS den Anstellwinkel
des SUN-SWATTER regulieren, also ganz einfach steiler oder flacher stellen.
Operating Instructions
1. All components except the boom stick are in the bag. There are two long frame poles, one
crossbar and one screen (optionally).
2. Assembly starts by putting the two sections of frame pole together.
3. Slide the pole into the sleeve along the screen.
4. Fit the yellow straps on either side together and pull them tight.
5. - 6. Next insert the crossbar in the T-connector. Make sure that at connection point you
insert the lock pins.
7. Now you tighten the black strap wich pulls the frame tight.
8. The GRIP-HEAD 710-100 is placed on to the crossbar and tightened NOT all the way. Very
important, the crossbar should still be able to move in the grip head.
9. Connect the boom stick to the GRIP-HEAD.
10.- 11. Sling the yellow strap around the black strap an two times around the boom stick just
below the first knuckle.
12. The SUN-SWATTER can be moved into many different positions just by loosen the first
knuckle of the boom stick and pushing up using the grip head as a fulcrum point.
SUNBOUNCE GmbH · Buchenring 8 - 10 · 21272 Egestorf · Germany
Telefon: +49 (0) 4175 - 80 88 79 87 · Telefax: +49 (0) 4175 - 80 88 79 67
E-Mail: info@sunbounce.com · Internet: www.sunbounce.com
SUNBOUNCE.COM
Stand 2012/03/14 © 2013 SUNBOUNCE GmbH. All rights reserved.