WARNING! Dry the appliance flat without using pegs
to avoid damaging it. Leave it to dry, laid out flat on a
clothes airer, not in direct sunlight.
•
DO NOT iron the heating pad.
Store this appliance as follows when not used:
• Wait for the heating pad to be completely dry if previously washed.
• It is recommended to place the heating pad in the package provided
upon purchase for better storage.
• When storing the appliance, allow it to cool down before folding.
• Store the heating pad in a dry place.
Examine the appliance and its supply cord frequently for signs
of wear or damage. lf there are such signs or in the case of
malfunction, contact an authorised technical service centre.
This chapter describes the most common problems that can arise using
the appliance. If the problems cannot be solved with the information below,
please contact the Authorised Assistance Centre.
Problem
The LEDs on the control unit
do not light up.
STORING THE HEATING PAD
TROUBLESHOOTING
Check that the control unit plug is fully inserted in
the socket. If the LEDs remain off, remove the con-
trol unit plug from the socket and return the under-
blanket to an authorised technical service centre.
Solution
EN
8