Master / Slave Function - Kapego 843023 Bedienungsanleitung

Manual
Article No.: 843023

7. Master / Slave Function

● The control of the light source will be effect via an RF controller and / or via the WiFi app by
using a smartphone or tablet with the WiFi box..
● The signals are sent to the controller via RF or WiFi which acts as a „master controller".
● From the „master controller" the signals are transmitted via a Cat 5 cable to the other
controller, these controllers act as a „slave controller".
● The controller must not be manually configured as master and slave. This is done
automatically when the „master controller" is connected to the RF controller or Wifi app and
the „slave controller" by association with the Cat 5 cable.
● The max. cable length between two controllers may not exceed 100 m.
● With the Master / Slave function, the system can be expanded without the need to have to
connect to each controller manually.
843152
RF
843152
6
RF
843152