Rj45 Assignment; Touch-Remote - Kapego 843023 Bedienungsanleitung

Manual
Article No.: 843023

5. RJ45 assignment

1. WHT/ORG Data 1 +
3. WHT/GRN Data 2 +
5. WHT/BLU N/C
7. WHT/BRN Data 1 COM
8. BRN Data 2 COM

6. Touch-Remote

Operation:
Frequency:
Distance:
Dimension (LxWxH):
On/Off Switch:
Touch Wheel:
Program Button "P":
Speed Button "S":
Dim Button "D":
1. Connect Touch-Controller with RF Controller
a. Switch on the Power of the RF Controller and then push and hold the "ON" button on
the Touch-Controller within 1 sec., after that the connected lamp flashes up 3 times, then
the Touch-Controller and the Controller are connected.
b. If this step isn't working please try again.
2. Disconnect Touch-Controller from RF Controller
a. Switch on the Power of the RF Controller and then push and hold the "ON" button on
the Touch-Controller within 1 sec. till the connected lamp flashes up 9 times, then the
Touch-Controller and the RF Controller are disconnected.
b. Now you can address the RF Controller again with the same or another Touch-
Controller.
1 - WHT/ORG Data 1 +
3 - WHT/GRN Data 2 +
5 WHT/BLU
7 - WHT/BRN Data 1 COM
8 - BRN
2x AAA Batterien (excl.)
2,4 GHz
ca. 20 m (inside)
110 x 52 x 20 mm
addressing with "ON"
Dimmer 0-100%
Change the program
Speed control
Dimmer
5
1
3
5
N/C
7
8
Data 2 COM
RJ 45