Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The Oil Filter
The oil filter is used when a function is
selected that requires operation of the fan,
for example the Turbo function. The filter
will protect the fan impeller (located behind
the fan cover) from spattered fat or oil.
Installation / Removal of the Oil Filter
To install the oil filter, use the holder to push
the oil filter onto the fan cover. Make sure
that the notches on the oil filter are inserted
into the slots on the fan cover.
To remove the oil filter, use the holder
to move the oil filter upwards so that the
notches on the oil filter are removed from
the slots on the fan cover.
Important: The oil filter should not be
used for cooking foods which are
expected to rise.
The Wire Rack with Easyfix Half
Telescopic Rail
The half telescopic rail extends half-way
out, to allow easy access to your food.
Telescopic rails
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
Fastener
•
On each telescopic rail there are
fasteners that allow you to remove them
for cleaning and repositioning.
•
Remove the side runner. See section
"Removal of the wire shelf".
•
Hang the telescopic rail top fasteners
on the side rack level reference wire
and simultaneously press the bottom
fasteners until you clearly hear the
fasteners clip into the side rack level
fixing wire.
•
In order to remove, hold the front
surface of the rail and repeat the
previous instructions in reverse.
The Wire Grid
The wire grid is best used for grilling or for
processing food in oven-friendly containers.
WARNING
Place the grid to any corresponding
rack in the oven cavity correctly and push it
to the end.
EN - 17
Fastening tab
Werbung
