Ronix RP-0800 Bedienungsanleitung Seite 25

ATTENTION!
1-Stop running and unplug it before maintenance.
2-Do not use the detergent, diluent, benzene and other chemical agents to
clean the machine.
3-Do not water the machine to avoid electric shock.
8
Float Stop
Device
Max water level
CONSUMABLES, FAULT AND HANDLING
The consumables can be removed and replaced when damaged or lost. Be
sure to install and use.
Seal ring for
upper cover
In the event of exceptions in use, read this manual carefully and confirm the
following points before repair.
Pour away the sewage before it exceeds
the maximum water level. If the machine
continues to be used after the sewage
exceeds the maximum water level, the
floating ball will work and the suction will
MAX
stop. When the water flows into the machine,
turn off the machine and clear away the
water inside the machine, pipe and bucket.
Inlet air sponge Filtering sponge Screw cap
|
2 3
User Manual