brennenstuhl Secure-Tec Bedienungsanleitung Seite 13

007812 Secure-Tec_007812
Secure-Tec
After the socket
control light "Protection on" will light up, indica-
ting that surge voltage protection
case of a direct lightning
mely high energy generated,
of the connected
You can get the highest level of surge protection
with a multi-level
medium protection
her with our fine protection
3. When the socket
green indicator lamp lights up, showing that the
surge voltage protection
not light up, an acoustic alarm will sound at the
same time
the mains power supply. To check whether
condition can be reset, press the 16 A automatic
circuit breaker. If this fails, the protection
and the sockets will continue
Insurance
Brennenstuhl
up to the technical
type label of the relevant product. If the product is
used correctly,
or exchange of all devices directly
the surge protection
to have been damaged
applies: damage
vance of the described
Operating
outlet has been switched
devices cannot be guaranteed.
concept consisting
(installation
outlet
circuit
and the sockets
protection for connected
guarantees
specifications
Brennenstuhl
product
by surge, if the following
must arise from the non-obser-
protection
Secure-Tec Akustik-Alarm
Instructions
is effective.
strike, due to the extre-
complete protection
of coarse and
technology)
per EN 61643-11 type
is switched on, the
is active. If it does
will be isolated
to be de-energised.
devices
the surge characteristics
indicated
assumes any repair
connected
and that are proven
function
1 15.06.11
on, the
In
toget-
from
this
is spent
on the
to
accor-
13