Problem Solving - Modecom Hub In Desk 60 Benutzerhandbuch

INTRODUCTION:
Thank you for purchasing MODECOM product. Before use please read carefully manual. If you
have any questions, please contact us.
INSTALLATION:
1. Insert the mounting ring into the desk.
2. Plug the included power adapter into a wall outlet or surge suppressor.
3. Plug the USB device cable into the USB port of your computer .
4. After finish installation hub will be ready to use.
5. System will detect Hub and install the required driver.
6. Hub is ready to use.
PROBLEM SOLVING:
Ifthe Hub has not been properly recognized by the computer:
+ Ensure that the USB cable is properly connected
• Check the computers BIOS settings
If the device connected to the hub does not work you should:
+ Check the cable from the device is properly plugged into the hub.
+ Disconnect and re-plug the device cable to the hub.