EN | SAM-1010
ALARM
Once the power outage alarm detects an interruption in the
power supply, the red LEDs will flash, and a loud alarm will sound
for at least 12 hours or until the built-in batteries are depleted.
Note: Even if the power supply is restored after a short
interruption, the SAM-1010 will continue to alarm, the red LEDs
will flash, and the alarm tone will briefly repeat every 3 minutes.
In this case, also check if the function of the connected devices
was affected by the power outage.
In the TUYA app, you can see the exact times when the power
supply failed or was restored. To do this, tap on the SAM-1010
icon in the app, then on "setting" and then on "Power Log".
EN
TURNING OFF THE ALARM
To turn off the alarm, briefly press the RESET button.
13