iOttie Easy One Touch Wireless 2 Handbuch Seite 4

Installation - CD
Please Note: Remember to remove
your Easy One Touch Wireless 2 to avoid possible damage to the product
and your vehicle. iOttie is not liable for possible damages due to misuse.
c
o
Press CD Slot mount & cradle
together, tighten Cradle Knob.
Test to make sure the Mount
is secure and insert Bracket if
O TheFootcanbeadjusted to 3different h eight s ettings to accommodate
different phone sizes, once setup is chosen, the foot is designed to align with
the center of the side arms for optimal Qi Wireless charging.
Slot Mount
all CDs from CD Slot before
A. Slide CD Slot Connector
CD slot.
B. Pull Leverto lock mount in place.
o
O Alignthe smartphone's backdrectly
centered on the mount's Easy One
Touch Trigger Button. The indicator
light will turn on when the charging
connection is found.
Installation
using Please use caution
not apply excessive pressure to Twist Lock as this may damage the blades.
iOttie is not liable for damages due to product misuse.
c
fully into
Press
together, tighten Cradle Knob.
Slowly tighten Twist Lock for
a secure
air vent.
The Foot can be adjusted to 3 different
different phone sizes, once setup is chosen, the foot is designed
the center of the side arms for optimal Qi Wireless charging.
- Vent Mount
when adjusting the Twist Lock on air vent blade. DO
O OpenTwist L ockandpushmount
vent mount & cradle
O Alignthesmartphone's backdirectly
connection to the
height settings to accommodate
completely onto vent blade.
O
centered on the mount's Easy One
Touch Trigger Button. The indicator
light will turn on when the charging
connection is found.
to align with