Cudy LT400 Kurzanleitung Zur Installation Seite 4

4. Then please check 4G information card of the status page. If the status
is connected, means connected to the internet successful y.
Status Connected
RSS' 22
Upload / Download 770.63KB / 681.69KB
More Details
Connected
5. If 4G is not connected, or if you want to customize the router yourself,
click "Quick Setup" and follow the step by step instructions to config
ure the router.
Status
Internet
Work Mode
Model
Quick Setup
Note :
1, f you are not sure about APN parameters, please contact your internet provider.
2, f you meet any other problems, don t hesitate to contact our technical support
team: support@cudy.com
Enjoy the internet!
Status Not connected
RSSI
Upload / Download 0.00 B/ 0.00 B
More Details
Not connected
Not connected
4G Router
LT400
-3
LED and Button
Item Status
POWER On/Off
On
INTERNET
Off
On
Flash
WAN / LAN
Off
On
LED
Flash
LAN 1 -LAN 3
Off
On
Flash
Wi-Fi
Off
On
Off
RST/WPS 1 second for WPS, 5 seconds for Reset
Button
Need Help?
QI . What should I do if I cannot access the web management page?
A1: If the computer is set to a static P address, change •tssettings to obtain an IP
address automatically.
A2: Make sure http://cudy.net/ or http://192.168.10.1/
web browser.
A3: Use another web browser and try again.
A4: Reboot your router and try again.
A5: Disable and enable the active network adapter in use.
02. How do I restore the router to its factory default settings?
A1: With the router powered on, press and ho d the RST/WPS button for 5 seconds
before re ease. Wait the router resets.
A2: Log in to the web management page of the router, and go to
Advanced Settings >Reset , click Perform Reset and wait until the reset process is
complete.
Explanation
Power on / Power off
nternet is connected
nternet is not connected
Connected
Transmitting
Disconnected
Connected
Transmitting
Disconnected
Wi-Fi is enable
Transmitting
Wi-Fi is disable
4G module is powered
4G module is not powered
is correctly entered in the
4
EN